Weekend Wrap Up (1500 Project – 16)

More work, more mess, but getting closer!

Just three photos for tonight. In this shot Guy is using one of the many Vice Grips from his bag of tricks. This kept the sheet metal aligned and flat as the quarter panel was welded:

Inside of the trunk looking at the back side of the quarter panel:

And finally, the quarter panel looking like a normal car again:

Next weekend we hope to have the metal work finished up. I need to patch the driver’s A-pillar, patch a rust hole on the bottom of the driver’s door, and Guy is going to patch the bottom of the driver’s fender. Hmmmm. That is starting to sound like more than a weekend…